DIGITAL DEW POINT CONTROLLER DGTP5-AN

The microprocessor driven controller DGTP5-AN serves to control the shielding gas generators using an L-probe. The control range is freely selectable within the limits of -50,0 … +50,0 ° Tp. The L-probe can be connected directly to the controller using the NTV 44P power supply to power the L probe. The PID controller parameters are automatically optimized (fuzzy-logic) and stored by the controller. Used as modulating controller a maximum pulse time of 2 seconds is preprogrammed, so additional external pulse-pause relays are not required. A non-volatile memory ensures the preservation of all data and software settings even after switching off the supply voltage. The adjustment of the desired application occurs via various software configuration levels.

Design:

Plastic housing for switch panel mounting

Degree of Protection – front:

NEMA4 for usage in confined spaces
(corresponds to the degree of protection IP66)

Degree of Protection – back:

Degree of protection according to IEC standard: IP20

Clamps:

Degree of protection according to IEC standard: IP20

Front panel:

92 x 92 mm (WxH)

Connection:

Screw connection
Wire cross-section max. 2.5 mm

Auxiliary voltage:

100 … 240 Vac, -15 + 10%, 50/60 Hz

Power consumption:

Approx. 16 VA

Hilfsspannung:

100…240 Vac, -15 +10 %, 50/60 Hz

Climate storage:

-10 … + 70 ° C

Operation:

0 … + 50 ° C, 5 … 95% rel. moisture, non-condensing

Display:

Two 4-digit seven-segment displays for PV and SV

Heights of digits:

PV = 15 mm red
SV = 11mm green

Optional equipment:

MK2.1 + L probe
Power supply NTV44P
Motor valve

ADVANTAGES:

μP-driven controller with fuzzy logic for shielding gas generators
Applicable as modulating controller or two-point controller for controlled systems with servomotor (optionally without feedback potentiometer)
High accuracy (± 0.2%) • Exchangeable output modules
Up to 2 freely definable alarm outputs
Ext. Set value input 4 … 20 mA
Modular construction
Optional actual value output 4 … 20 mA
Serial communication via RS-232C, RS422 or RS-485 and transmission output (4…20 mA)

OUR PRODUCT IN THE INDUSTRY

This unit is for use in a heat treatment industry.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.