DEWCHECKER 3.1

ADVANTAGES: 

  • Automatic dew point measurement instrument
  • High measuring certainty and accuracy
  • Internal sample pump
  • Robust construction and easy handling

FEATURES:

The automatic dew point measurement instrument Dewchecker 3.1 is a portable device used for measuring the dew point temperature of gases.

Per definition, the dew point is the temperature of a body at which the water vapors start to condensate on its surface, respectively the balance adjusted between condensing and evaporating water. The level of the dew point depends on the moistness of the measuring gas. Due to the direct measurement of the dew point temperature, the measurement is accurate and long-term stable. With this device, it is possible to measure dew point temperatures lower than the ambient temperature. Moreover, the device itself requires very low maintenance.

Dewchecker 3.1 measures the dew point value completely automatically. A beam of light, from the emitting diode, is aimed at the mirror’s surface and a photodetector monitors the reflected light. The Mirror is constructed from a material with good thermal conductivity and it is cooled down by using a thermoelectric cooler until the condensation begins. As the amount of reflected light decreases, due to the absorption, the photodetector output decreases also. An internal control system monitors the mirror’s temperature at the dew point level over reflected photodetector voltage.

The device is available for either 230 V or 115 V supply voltage.

Design:

Portable steel housing

Dimensions:

330x310x320 mm (WxHxD)

Weight:

Approx. 17 kg

Degree of Protection:

Housing IP 20 according to IEC 60529
Front panel IP 40 according to IEC 60529

Power Supply:

230 or 115 VAC ±10% 50…60 Hz (please specify)

Measuring Range::

-25…+30°C (direkte Messung mit Spiegel)

Measuring Gas Connectors (hose connectors):

Input: Tube outer diameter 5…6 mm
Output: Tube outer diameter 5…6 mm
Built-in measuring pump

Measuring Gas Pressure:

±50 mbar

Digital Output:

Relay 1; 5A/250V Indication of good measurement result

Analog Output:

–25…+25 °C , 0…20 mA or 4…20 mA or 0…10 V
galvanic isolated, 4…20 mA is predefined setting

Humidity:

Up to 70 %, non-condensing

Ambient Temperature:

10…40 °C during operation
0…50 °C during storage

Gas Flow:

Approx. 1l/min.

Resolution in steps of:

0,1°C

Maintenance Interval:

Every year

Communication:

Either RS-485 / RS-422 four-wire or RS-485 two-wire (please specify)
Isolated interface with Modbus-protocol

ACCESSORIES

Power cord

product code 011-0520

Polishing cotton

product code 130-6050

Polishing paste

/

Connection pipe yellow

product code 015-7103

8 mm with adapter approx. 3 m

/

Connection pipe yellow

product code 015-7102

6 mm approx. 3 m

/

In-line filter

product code 24382

Filter material

product code 24221

Wooden stick for cleaning

/

Spare fuse (230V)

product code 027-0005

Spare fuse (115V)

product code 027-0011

Spare sinter filter insert

product code 2418
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.